Display indicators
The device is being used in a UMTS network or a GSM
network (network service). The bar next to the icon
indicates the signal strength of the network at your
current location. The higher the bar, the stronger the
signal.
High-speed packet access (HSPA) (network service)
in the UMTS network is activated.
The device is using the Offline profile and is not
connected to a cellular network.
The battery charge level. The higher the bar, the
stronger the charge in the battery.
You have unread messages in the Inbox folder in
Messaging.
You have received new e-mail in the remote
mailbox.
There are messages waiting to be sent in the Outbox
folder in Messaging.
You have missed calls.
The keys of the device are locked.
An alarm is active.
You have activated the Silent profile, and the device
does not ring for an incoming call or message.
Bluetooth connectivity is activated.
A Bluetooth connection is established. When the
indicator is blinking, your device is trying to connect
with another device.
Your device
© 2009 Nokia. All rights reserved.
14
A GPRS packet data connection is available (network
service). indicates that the connection is active.
indicates that the connection is on hold.
An EGPRS packet data connection is available
(network service). indicates that the connection is
active. indicates that the connection is on hold.
A UMTS packet data connection is available (network
service). indicates that the connection is active.
indicates that the connection is on hold.
HSPA is supported and available (network service).
The icon may vary between regions. indicates that
the connection is active. indicates that the
connection is on hold.
You have set the device to scan for wireless LANs
(WLAN), and a WLAN is available.
A WLAN connection is active in a network that does
not have encryption.
A WLAN connection is active in a network that has
encryption.
Your device is connected to a computer with a USB
data cable.
All calls are forwarded to another number.
A headset is connected to the device.
A hands-free car kit is connected to the device.
A loopset is connected to the device.
Your device is synchronising.
The GPS indicator shows the availability of the
satellite signals. One bar is one satellite. When the
device receives enough data from the satellites to
calculate your location, the bar turns green.
Other indicators may also be displayed.